M16 Washer Dimensions & Size

M16 washer dimensions are standardized for high-load structural and heavy mechanical applications, including bridge construction, heavy industrial machinery, wind turbine assembly, and large-scale steel framing. Specifically designed for fasteners with a 16 mm nominal diameter, these components ensure stable load distribution and protect mating surfaces from damage during high-torque tightening. This chart covers Form A plain washers, which feature a flat surface without a chamfer (unlike Form B).

The M16 size is available in three versatile series: the Normal Series (DIN 125A / ISO 7089) for standard load distribution, the Large Series (DIN 9021 / ISO 7093) for significantly increased surface area, and the Small Series (DIN 433 / ISO 7092) for tight radial clearances. Based on these standards, M16 washers typically feature a hardness of 200 HV or 300 HV (Vickers Hardness), providing the structural integrity required to prevent “cupping” or deformation under the substantial clamping forces of grade 8.8, 10.9, or 12.9 bolts.

Note: While these values reflect standard manufacturer datasheets, actual dimensions and tolerances may vary based on material (e.g., Stainless Steel vs. Hot-Dip Galvanized Steel) and manufacturing class. Always verify with the official product datasheet for critical applications.

Washer dimension diagram showing inner diameter, outside diameter, and thickness
M16 Standard Series Washer – DIN 125A/ISO 7089
Dimension Size (mm)
Min Max
Inner Diameter 17 17.27
Outside Diameter 29.48 30
Thickness 2.7 3.3
M16 Large Series Washer – DIN 9021/ISO 7093
Dimension Size (mm)
Min Max
Inner Diameter 17 17.27
Outside Diameter 49.38 50
Thickness 2.7 3.3
M16 Small Series Washer – DIN 433/ISO 7092
Dimension Size (mm)
Min Max
Inner Diameter 17 17.27
Outside Diameter 27.48 28
Thickness 2.3 2.7
  • Inner Diameter – The diameter of the hole, designed to clear the bolt/screw thread.
  • Outside Diameter – The total width of the washer, determining the load distribution area.
  • Thickness – The height of the washer, providing the spacing and structural support.
Metric to Inch Converter
Enter mm to convert to inches
Previous & Next Size Chart
← M14
→ M18

← Choose Another Size

Frequently Asked Questions

What does the “M16” designation mean on a washer?

The “M” stands for Metric, and the number represents the nominal thread diameter of the screw or bolt. An M16 washer is designed specifically for fasteners with a 16 mm nominal major diameter.

What is the difference between Form A and Form B washers?

The difference lies in the outer edge finish. Form A washers have a square, flat edge and are the most common. Form B washers include a 30° to 40° chamfer (beveled edge) on one side, according to DIN 125B and ISO 7090 standards.

When should I use a Large Series (DIN 9021) M16 washer?

The Large Series (DIN 9021 / ISO 7093) features a wide outside diameter of 50 mm, which is approximately three times the nominal thread size. It is used when fastening into softer materials like structural timber, composite panels, or thin metal plates where you need to spread the clamping force over a maximum surface area to prevent the bolt head from sinking into or pulling through the material.

What does the HV rating mean on a washer?

HV stands for Vickers Hardness. For M16 fasteners, a rating of 200 HV or 300 HV is standard for steel and stainless steel. This ensures the washer maintains its flatness and resists indentation even when subjected to the high torque levels required for structural mechanical joints.

What is the difference between Small Series (DIN 433) and Normal Series?

The Small Series (DIN 433 / ISO 7092) has a narrower outside diameter 28 mm compared to the Normal Series 30 mm. It is specifically intended for use with Socket Head Cap Screws or in recessed counterbores where a standard-width washer would be too large to fit the available space.

In which materials are M16 washers commonly available?

M16 washers are most frequently produced in A2 (304) and A4 (316) Stainless Steel for corrosion resistance. They are also widely available in Hot-Dip Galvanized Steel for outdoor construction and Zinc-Plated Steel for general industrial hardware.