M33 Washer Dimensions & Size

M33 washer dimensions are standardized for extreme-load structural and mechanical applications, including heavy-duty transmission systems, bridge structural components, massive steel frameworks, and maritime engineering. Specifically designed for fasteners with a 33 mm nominal diameter, these components ensure stable load distribution and protect mating surfaces from damage during the high-torque tightening required for industrial-scale joints. This chart covers Form A plain washers, which feature a flat surface without a chamfer (unlike Form B).

According to the provided technical data, the M33 size is represented by the Normal Series (DIN 125A / ISO 7089), the standard for general heavy engineering and structural applications. Based on these standards, M33 washers typically feature a hardness of 200 HV or 300 HV (Vickers Hardness), providing the structural integrity required to prevent deformation or “cupping” under the massive clamping forces of grade 8.8, 10.9, or 12.9 bolts.

Note: While these values reflect standard manufacturer datasheets, actual dimensions and tolerances may vary based on material (e.g., Stainless Steel vs. Hot-Dip Galvanized Steel) and manufacturing class. Always verify with the official product datasheet for critical applications.

Washer dimension diagram showing inner diameter, outside diameter, and thickness
M33 Standard Series Washer – DIN 125A/ISO 7089
Dimension Size (mm)
Min Max
Inner Diameter 34 34.62
Outside Diameter 58.8 60
Thickness 4.4 5.6
  • Inner Diameter – The diameter of the hole, designed to clear the bolt/screw thread.
  • Outside Diameter – The total width of the washer, determining the load distribution area.
  • Thickness – The height of the washer, providing the spacing and structural support.
Metric to Inch Converter
Enter mm to convert to inches
Previous & Next Size Chart
← M30
→ M36

← Choose Another Size

Frequently Asked Questions

What does the “M33” designation mean on a washer?

The “M” stands for Metric, and the number represents the nominal thread diameter of the screw or bolt. An M33 washer is designed specifically for fasteners with a 33 mm nominal major diameter.

What is the difference between Form A and Form B washers?

The difference lies in the outer edge finish. Form A washers have a square, flat edge and are the most common. Form B washers include a 30° to 40° chamfer (beveled edge) on one side, according to DIN 125B and ISO 7090 standards.

What standard is used for M33 washers?

M33 washers in this technical guide follow the Normal Series (DIN 125A / ISO 7089) standard. This is the industry benchmark for flat washers used with large hexagon bolts in structural and mechanical projects.

What does the HV rating mean on a washer?

HV stands for Vickers Hardness. For M33 fasteners, a rating of 200 HV or 300 HV is typical for steel and stainless steel. This ensures the washer resists the intense indentation forces generated during the high-torque installation of heavy-duty structural bolts.

In which materials are M33 washers commonly available?

M33 washers are most frequently produced in Hot-Dip Galvanized Steel for outdoor construction due to its superior corrosion resistance. They are also available in A4 (316) Stainless Steel for marine environments and Plain (Black) Steel for internal industrial machinery.